Flakeboard-manufacture,factory,supplier from China

   Particle board is also referred to as chipboard or flakeboard, it's a form of wood-primarily based panel made of timber or different lignocellulosic materials and stuck under warmth and strain after applying adhesive.

What is particle board?  Particle board is also called chipboard or flakeboard. It is made of wood or other nitrocellulose materials. It is a wood-based board glued under the action of heat and pressure after applying an adhesive.

    Particleboard, also known as chipboard, flakeboard, is a wood-based panel that is made of wood or other lignocellulosic materials and glued under heat and pressure after applying an adhesive. It is mainly used in furniture manufacturing and construction industry as well as train and car carriage manufacturing.Method for judging the quality of particleboard wardrobes1. From the appearance point of view, look at the size and shape of the sawdust particles in the center of the cross section. The length is generally 5-10MM.

Advantages of MDFThe surface is smooth and flat, the edges are firm, the surface decoration is good, and it is easy to finish and process. All kinds of paints and paints can be evenly slaughtered on MDF boards. Various veneers, adhesive tape films, light metal sheets, and melamine boards can be pasted on the surface. , good physical properties, no dehydration problem.

MDF processing performance:Medium density fiberboard can be produced from a few millimeters to tens of millimeters thick, can replace any thickness of wood, square timber, and has good mechanical processing performance, sawing, drilling, slotting, tenoning, sanding and engraving , The edge of the plate can be processed according to any shape, and the surface is smooth after processing.Due to its excellent performance and an effective way to comprehensively and rationally utilize wood, MDF is one of the most promising products at present.Medium density fiberboard features:1.

Features of MDF1. The material is uniform, the layer structure is dense, the surface is smooth and clean, not easy to deform, stable performance, smooth and delicate edges, not easy to collapse and layer; non-toxic, tasteless, non-radiation, good air permeability;2. Good heat insulation performance, no aging, strong adhesion;3.

MDF HDF Details  Size:1220*2440 1250*2500 or customized sizeThickness:1-30mmGlue:E0 /E1 /E2Material:Polar pine combiDensity:650-980 kg/m3Certificate:ISO, SGS, FSC,P2Moisture Content:4-6%Usage:for laminating board, furniture back panel, flooring, interior and exterior decorationMOQ:1X40HQPayment Term:T/T or 100% LC at sightPacking:Standard exporting palletsDelivery time:20 days after received dopositMDF HDF Properties    EN622-5:2009 MDF-GPPropertyTest MethodUnitRanges of nominal thickness (mm)1.8-2.52.5-44-66-99-1212-1919-3030-45＞45Swelling in Thickness 24 hEN317%45353

The benefits of MDF:Good flexibility (Because the door panel is often pushed and pulled to open and close, if it is too hard, it will easily lead to cracking, so this advantage of MDF can just be used)Easy to shape (because it is a powder structure, and very flat and smooth, so it is easy to shape, which just meets the needs of consumers for different shapes of door panels)Xinhua Wood Factory Appearance  Xinhua Wood Storages  Xinhua Wood Machinery  Xinhua Wood Quality Certificates  Xinhua Wood Factory IntroductionGaotang County Xinhua Wood Industry Co.,

Advantages of MDF1. The internal structure is uniform, the density is moderate, the dimensional stability is good, the deformation is small, and the physical and mechanical properties are moderate.2. The surface is smooth and smooth, with good machining performance. It can be pasted with sliced veneer, patterns and novel and beautiful decorative papers. Therefore, it is very popular in home decoration and is often used to make furniture and partitions.3. It can be used as the middle frame and middle clip strip in the modern decorative frameless painting.

Medium-density fiberboard is made of wood fiber or other plant fiber, applied with urea-formaldehyde resin or other synthetic resin, and pressed under heat and pressure to form a board with a density in the range of 0.50-0.88g/cm3, and other suitable materials can also be added. Additives to improve sheet properties.MDF has good physical and mechanical properties and processing properties, and can be made into plates of different thicknesses, so it is widely used in furniture manufacturing, construction, and interior decoration.

MDF Mechanical propertiesBecause the fiber structure of the board is uniform and the bonding strength between fibers is high, its static bending strength, plane tensile strength, and elastic modulus are better than particleboard.

What is the difference between particleboard and MDF?Nowadays, there are more and more types of furniture on the market, and furniture panels are also emerging in an endless stream. Consumers consider their panels in detail when purchasing furniture. Do you know what is the main difference between MDF and Particleboard? Let’s take a look at the differences between them.Particleboard:Particleboard is a kind of man-made board that is glued together under the action of heat and pressure after adhesive is applied.

    Medium density fiberboard is made of wood fiber and other fibers as raw materials, prepared by fiber, then applied with synthetic glue and other functional materials, and pressed into boards with different thicknesses and densities under heat and pressure. Among them, the moisture-proof MDF is made of modified melamine cyanamide adhesive or MDI type adhesive, and the use of waterproofing agent is improved at the same time.

Soak the common substrate and moisture-proof substrate in water at the same time, and the expansion rate of the common plate is significantly higher than that of the moisture-proof plate after two hours of expansion change. The moisture-proof board has good moisture-proof performance and is suitable for making kitchen furniture and bathroom furniture.Damp-proof board cannot be directly used on furniture, and decorative paper should be pasted on the surface. The normal practice is to soak the decorative paper in melamine solution, and then press it on after hot pressing.

According to density, it can be divided into: high-density fiberboard, medium-density fiberboard, and low-density fiberboard (the density of medium-density fiberboard is 500 kg/m3-880 kg/m3, and the density of high-density fiberboard is ≥800 kg/m3).According to the national standard (GB/T 11718-2021), it is divided into: ordinary MDF, furniture MDF and load-bearing MDF.According to the use, it can be divided into: furniture board, floor base material, door panel base material, electronic circuit board, engraving and milling board, moisture-proof board, fire-proof board and line board

FR MDF Advantages:1.The fireproof board has low hygroscopicity, stable water-absorbing thickness expansion rate, and excellent moisture-proof performance. It is especially suitable for secondary processing such as finishes, adhesives, and paints.

Carbon Crystal Panel and Its AdvantagesCarbon crystal panel is generally used in paint-free technology, with high environmental protection and good moisture resistance. In terms of materials, they all belong to composite boards. If they are under the same brand, the quality of carbon crystal boards is better. In contrast, carbon crystal panels are waterproof, moisture-proof, environmentally friendly, formaldehyde-free, crack-resistant and non-deformable. Carbon crystal plate is a new type of high-tech environmental protection material.

Advantages of Carbon Crystal Plates or Black MDFCarbon crystal panels are environmentally friendly, durable, moisture-proof, flame-retardant, sound-absorbing, anti-aging and other practical and excellent features, helping you easily have a healthy, environmentally friendly and safe living home.Noise reductionThe carbon crystal wall panel has a good diffuse reflection for sound, and has a relatively buffering impact of the subwoofer; the sound insulation has reached 29 decibels after testing, which is 13 decibels higher than the sound insulation of a 25 cm wall, which solves the incoming noise

Advantages of MDF1. The density of medium density fiberboard is very high, so it is called MDF. Its surface can be pasted with melamine or wood veneer. Its physical properties are very good, the material is uniform, and there is no dehydration problem, so it will not be deformed by moisture.2. Medium density fiberboard is made of crushed plant fibers and pressed at high temperature, so the surface of this board is very smooth and square. It can be used not only as furniture materials, but also as decorative panels, light metal sheets, veneer, etc.3. Is MDF high in formaldehyde?1.

      High-density fiberboard （HDF) is a board made of wood fiber or other plant fiber, applied with urea-formaldehyde resin, or other synthetic resins under heat and pressure.    The most advanced flat pressing complete production line in the world. Therefore, the physical performance is higher and better than that of medium-density fiberboard, and its density is usually above 800kg/M3.

          High-density fiberboard (English name: High Density Fiberboard, abbreviated as HDF) is a board made of wood fiber or other plant fiber, applied with urea-formaldehyde resin, or other synthetic resins under heat and pressure.          The most advanced flat pressing complete production line in the world. Therefore, the physical performance is higher and better than that of medium-density fiberboard, and its density is usually above 800kg/M3.

What is Black Core HDF?    The Black Core HDF floor is a floor made of this carbon crystal.    Carbon crystal is a kind of microcrystalline carbon particles purified from minerals, commonly known as high carbon graphite.

Product performance  The most advanced flat pressing production line in the world. Therefore, the physical performance is higher and better than that of MDF. Its density is usually above 800kg/M3. The high-density fiberboard produced has reached 930kg/M3, which has reached the advanced level of similar products in Europe and America.   The board surface texture is fine and smooth.

Instruction of Waterproof FiberboardWaterproof Fiberboard, also known as fiberboard , is an artificial board made of wood fiber or other plant fibers as raw materials and urea-formaldehyde resin or other suitable adhesives.Warehouse  Xinhua Wood Company Show  Gaotang County Xinhua Wood Industry Co., Ltd. was established in April 2010 with a registered capital of 11 million yuan. It covers an area of about 76,600 square meters, including a construction area of about 22,000 square meters.