Flooring-manufacture,factory,supplier from China

What is Black Core HDF?    The Black Core HDF floor is a floor made of this carbon crystal.    Carbon crystal is a kind of microcrystalline carbon particles purified from minerals, commonly known as high carbon graphite.

MDF HDF Details  Size:1220*2440 1250*2500 or customized sizeThickness:1-30mmGlue:E0 /E1 /E2Material:Polar pine combiDensity:650-980 kg/m3Certificate:ISO, SGS, FSC,P2Moisture Content:4-6%Usage:for laminating board, furniture back panel, flooring, interior and exterior decorationMOQ:1X40HQPayment Term:T/T or 100% LC at sightPacking:Standard exporting palletsDelivery time:20 days after received dopositMDF HDF Properties    EN622-5:2009 MDF-GPPropertyTest MethodUnitRanges of nominal thickness (mm)1.8-2.52.5-44-66-99-1212-1919-3030-45＞45Swelling in Thickness 24 hEN317%45353

      Product performance of medium density board: uniform material, dense layer structure, smooth and smooth surface, not easy to deform, stable performance, smooth and delicate edges, not easy to collapse and delaminate; non-toxic, tasteless, non-radiative, and good air permeability.MDF is mainly used for: laminate flooring, door panels, partition walls, furniture, etc., and is mainly used for the surface of mixed oil process in home decoration.Xinhua Wood Factory Scene  Xinhua Wood Machinery  Xinhua Wood IntroductionGaotang County Xinhua Wood Industry Co.,

1. The use of particleboard in flooring:Particleboard is used as flooring material in temporary structures with less load. It is also widely used as a covering for hardwood floors because hardwood planks have low resistance to scratches to protect them. Wood veneer particleboard or laminated particleboard is used for floors where a finished aesthetic look is desired.2. Use of particleboard in floor underlayment:Particleboard is widely used as floor underlayment or as a basis for parquet, wooden or carpet floors.

  1. The characteristics of density board: the surface of density board is smooth and flat, the material is fine and dense, the performance is stable, the edge is firm, and the surface of the board is decorative. However, density boards have poor moisture resistance, and in comparison, density boards have poorer nail-holding power than particle boards. If the screws loosen after tightening, it is difficult to fix them again due to the low strength of density boards.2. The use of MDF: mainly used for laminate flooring, door panels, partition walls, furniture, etc.

      MDF is mainly used for laminate flooring, door panels, partition walls, furniture, etc. MDF is mainly used for surface treatment of oil-mixed technology in home decoration; MDF is generally used for furniture, because the density of high-density boards is too high. It cracks easily, so there is no way to make furniture.       Generally, HDF is used for indoor and outdoor decoration, office and civilian furniture, audio, and vehicle interior decoration. It is also a good material for packaging.

Medium Density Fiberboard Introduction:Density board, also known as fiberboard (full name: MDF fiberboard), is a man-made board made of wood fiber or other plant fiber, applied with urea-formaldehyde resin or other suitable adhesives. According to its density, it can be divided into high density board, medium density board and low density board. Mainly used for laminate flooring, door panels, partition walls, furniture, etc.

The main purpose of MDF FiberboardMainly used for laminate flooring, door panels, partition walls, furniture, etc. MDF is mainly used for surface treatment of oil-mixed technology in home decoration; MDF is generally used for furniture, and high-density boards are used for interior decoration. Exterior decoration, office and civilian furniture, audio, vehicle interior decoration, can also be used as anti-static floor in computer room and production material for wall panels, security doors, wall panels, partitions, etc. It is also a good material for packaging.

     Our most vital products include: Particle board, OSB, MDF, HDF,Finished MDF, with many superior imported equipments and manufacturing traces, truly offering capability not less than 30,000 cubic meters monthly.     All production properly adapt to The United States, India, Middle-east, South Asia, Europe, Middle & South America, many nations and areas, well used and in shape for furnishings, decorations and production industries.     We constantly insist on "High-quality first, Service-first" making standard products and comu

   Particle board is also referred to as chipboard or flakeboard, it's a form of wood-primarily based panel made of timber or different lignocellulosic materials and stuck under warmth and strain after applying adhesive.

1. Physical and mechanical propertiesDue to the uniform fiber structure of the board and the high bonding strength between fibers, its static bending strength, plane tensile strength, elastic modulus, and screw-holding force are better than particleboard. Hygroscopicity, water absorption performance, thickness expansion rate is low.2. Decorative performanceBecause the surface of medium density fiberboard is flat and smooth, it is easy to glue planed veneer and tissue paper and other decorative materials, and it is easy to paint and save paint.3.

Product Details:Product:MDF Material:Polar Pine Combi HardwoodGlue:MDI UF MEL WBP Phenolic E0 E1 E2Size:1220*2440 1250*2500 mm or accept customizationThickness:0.8-18mm or accept customizationDensity:650-1000 KG/CBMMoisture content:3%-13%MOQ:20 CBMDelivery time:15-25 daysThickness tolerance:+-0.2mmSize Tolerance:+-2mmUsage:Roof decking, furniture,packing,hoarding,signboards, portable building, interior and outerior decoration,

Advantages and disadvantages of density boardadvantage:      1. The MDF surface is flat and easy to paint. All kinds of paints and paints can be evenly coated on the density board, which is the first choice for paint effect.      2. Density board is another kind of beautiful decorative board, which is better than solid wood furniture in appearance.      3. All kinds of veneer, printed paper, PVC, gummed paper film, melamine impregnated paper and light metal sheet can be decorated on the surface of MDF.      4.

Advantages of MDF1. The density of medium density fiberboard is very high, so it is called MDF. Its surface can be pasted with melamine or wood veneer. Its physical properties are very good, the material is uniform, and there is no dehydration problem, so it will not be deformed by moisture.2. Medium density fiberboard is made of crushed plant fibers and pressed at high temperature, so the surface of this board is very smooth and square. It can be used not only as furniture materials, but also as decorative panels, light metal sheets, veneer, etc.3. Is MDF high in formaldehyde?1.

    Medium density fiberboard is a kind of artificial board made from the thinned wood of branches, small diameter wood, fast-growing wood, bamboo and other plant materials with limited wood resources. The comprehensive utilization rate of wood is high, which conforms to China's forestry development policy and is conducive to the implementation of China's forestry sustainable development strategy.Medium density fiberboard DisplayProduct Certificates-SGS,ISO9001,FSC  

  Density board is made of wood fiber or other plant fiber, prepared by fiber, applied with synthetic resin, and pressed under heat and pressure.Certificates ISO FSC SGS  

   Density board, also known as fiberboard, is an artificial board made of wood fiber or other plant fiber by hot pressing after slicing, cooking, fiber separation, and drying, then applying urea-formaldehyde resin or other suitable adhesives. the   According to the density, it can be divided into low-density board (weight less than 550KG/M3), also known as low-density fiberboard. Medium density board (weight 550~880KG/M3), also known as medium density fiberboard.

   MDF is a man-made board made of wood or plant fiber, mixed with adhesives and waterproofing agents, etc., and pressed under high temperature and high pressure. It is an ideal man-made board for furniture production.Advantages of MDF:Medium density fiberboard has uniform internal structure, moderate density, strong stability, not easy to deform or crack, and durable.2. Medium density fiberboard has a smooth surface, strong plasticity, and good production and processing performance.

FeaturesThe density board surface is smooth and flat, the material is fine and dense, the performance is stable, the edge is firm, and the surface of the board is very decorative. But the density board has poor moisture resistance. In contrast, the nail-holding force of MDF is worse than that of particleboard. If the screws loosen after tightening, it is difficult to fix them at the same position.The main advantage1. Density board is easy to be painted. All kinds of paints and paints can be evenly coated on the density board, which is the first choice for paint effect.2.

1.

The production of chipboard in China has gone through a repeated process from the rise in the 1980s to the decline in the 1990s and then to the rise again in 2000.    After the particle board was abandoned by the market due to poor quality and other reasons, many particle board enterprises learned a lesson, introduced advanced production lines from abroad and improved the technology level.   After that, the quality of particle board in China has improved significantly, and it has been accepted by the market again.

   The production of chipboard in China has gone through a repeated process from the rise in the 1980s to the decline in the 1990s and then to the rise again in 2000. After the particle board was abandoned by the market due to poor quality and other reasons, many particle board enterprises learned a lesson, introduced advanced production lines from abroad and improved the technology level.    After that, the quality of particle board in China has improved significantly, and it has been accepted by the market again.

Medium Density Fiberboard classification:       According to the density, it can be divided into high-density board, medium-density board, and low-density board (the density of medium-density board is 550 kg-880 kg/m3, and the density of high-density board is more than 880 kg/m3). Commonly used specifications are 1220*2440mm and 1525*2440mm, and the thickness is 2.0mm~25mm.

The reason for the deformation of density board furniture is here?    We all know that MDF has a wide range of applications. However, furniture made of this kind of board often has such a problem: the furniture board is deformed, which is very annoying.It not only seriously affects the normal use of our furniture, but also has a bad influence on family life. We knowThere are many reasons for this problem, and we will introduce them in detail below.1.